Can a Dental Implant Be Removed?

21 Feb Can a Dental Implant Be Removed?

Is it possible to have a dental implant removed? If so, will the procedure include intricate and complicated techniques? Read along to learn more about the removal of dental implants as discussed below.

Overview on Failed Dental Implants 

Generally, dental implantation is safe and successful, as long as a highly skilled oral surgeon performs this process. The success of the procedure is also made possible when the implants are positioned properly, restored and selected well. However, poor planning and work done by an unskilled dentist may result to failure of dental implants. While this is a rare situation, in such circumstances.

Failed implants must be removed and replaced to prevent serious effects to occur. This means, the affected area must be repaired after removing the implants, then a new one will be positioned appropriately. However, the entire procedure can be a difficult and tedious process since the implants tend to fuse and integrate to the bone surrounding it. Because of this, it is important to disrupt the bone that will remove the failed implant.

Techniques Involved in Dental Implant Removal

To remove failed dental implants, there are two techniques that need to be done. One of these methods involves the use of a trough bur, which is a cutting instrument. This tool is designed to cut the bone safely along the implant that has already healed. With this technique, a small amount of bone at around 0.5 to 1 millimeter is cut, which should cause the implant to loosen and become easier to remove.

Upon removal, the region is cleaned carefully and assessed for any other methods required such as bone grafting. This process helps restore any defects on the bone to ensure the success of the removal of the implant. Healthy bone may also need to be removed along the process, which is not as painful or traumatic. Keep in mind, though, that excessive heat may be produced in cutting the bone, and this may impact its vitality. As a result, bone grafting may be necessary because of ital bone loss.

Although this is the older method in removing implants, a newer one is considered as minimally invasive. This breakthrough in implant removal uses tools that will remove the implant right off the bone. With the use of an adapter, this instrument is attached by the surgeon to the affected implant. Then, the adapter is hooked with a high-torque tool and a high-reverse amount of torque is applied to debone and remove the implant from the bone.

In the case of extremely tight implants or very dense bone, there may be a need to cut a few millimeters of the bone to support the removal of the failed implant. The good thing about this technique is there is no risk of removing vital bone, so it is preseved for future need for implant placement.

With all these things in mind, it is best to consult a well-trained and highly skilled oral surgeon who can perform this process of failed implant removal in a safe and effective manner. Skillful dentists can be found in certain countries through Europe, in dental implants Hungary is a wise choice.